It is a probe(Immersion temperature sensor for molten metal) that measures the temperature of the molten metal by using thermocouple which complied with JIS C1602-1995. In case of the multi-measuring type, because 5-10 times measurements are possible for cast iron, temperature measuring is able to be high accuracy and low cost. The kind of the paper protective tube, the length and protecting cup were selected by the kind of molten metal and the range of the measuring temperature and the measuring environment.
※ The development product actually used is published on the Various instrument for analysis pages.
|Easy handling and measurement is able to be efficient with highly accurate(complied with JIS Q 9001:2015).
|The certification: ISO 9001:2015 / JIS Q 9001:2015
|Very easy maintenance by grace of consumption type
|A wide assortment in stock that can correspond to customer's usage. ※To be available for various holders.
The kind of the paper protective tube, the length and protective cup were selected by the kind of molten metal and the range of the measuring temperature and the measuring environment., A wide assortment in stock that can correspond to customer's usage. Moreover, it responds to the design and production by a special order in order to satisfy the demand as much as possible. Please feel free to contact us if you have any questions or comments.
Splash prevention type
It is a probe that combined the ceramic fiber with the hull in the paper tube. When the probe is immersed in the molten metal, Moisture of the paper tube react intensely with the molten metal and it flies in all directions (splash).
This probe is made of the paper tube of a normal type. This type is cheaper than the splash prevention type,in general,it uses in order to measure the temperature of molten metal in the furnace by long holder.
|Kind of thermocouples
|R or Type B
|Kind of protective paper tube
|Splash prevention type or Standard type
|Protection cap at the front edge
|Fe (steel) or Al (aluminum)
|95 〜 1200 mm (all kinds)
|Explanation of individual part
It is possible to change in length and the bend angle of the holder. Please feel free to contact us if you have any questions or comments.
As for the expendable temperature probe a wide assortment in stock that can correspond to customer's usage. Moreover, it responds to the design and production by a special order in order to satisfy the demand as much as possible. Please feel free to contact us if you have any questions or comments.
|The in-furnace temperature measurement
|Type R thermocouple, which complied with JIS C1602
|0 ~ 1760℃
|Holding method by setting condition
|Built-in Ni-cd battery(rechargeable)
|Function and specification
|Operating temperature limits
|0 〜 45℃
|Charger and holder
|Wireless temperature display
|Wireless handy type thermometer
Use it together with wireless temperature display(JTT-Disp240).
Temperature information transmitted from Wireless Immersion Digital Thermometer (J501-TM-WL) is received automatically and the equipment identification number and the peak hold temperature are in real-time displayed (Within 100M of radio communication airline distance in the absence of obstacle)
It has five columns and big display size(240mm) with using the red color high brightness 7-segment LED display. The visible distance will be achieved 100M in order to look easy it.
It is possible to connect each other with 16 Wireless Immersion Digital Thermometers (J501-TM-WL) (The setting of the PANID network group is necessary).
When two or more PANID is set and the temperature measurement is started, they are displayed in order of the measurement.
The setting cycle time, which are switching interval time and data holding time as for the two or more temperatures display, can be changed from Wireless Immersion Digital Thermometers (J501-TM-WL) by using wireless
Temperature information transmitted from our Wireless Immersion Digital Thermometer (J501-TM-WL) is received automatically and the equipment identification number and the peak hold temperature are in real-time displayed (Within 100M of radio communication airline distance in the absence of obstacle)
|Content of setting
|The Number of Connectable Devices
|Maximum connection with our Wireless Immersion Digital Thermometer(JT501-TM-WL) :16sets
|Radio communication airline distance
|Radio communication airline distancein the absence of obstacle : 100M
|Material / Painting
|1.6t Cold rolled steel(SPCC) the case / Black baking finish after antirust coating
|80W(The maximum brightness is set).
|AC85 ~ 132V / AC170 ~ 264V (Automatic change)
|External dimensions (mm)
|Wireless temperature display (JTT-Disp240)
|① Indicating lamp
|State display of Sensor
・A green lamp lights at electrical continuity
・A red lamp lights at electrical disconnecting
|② Front panel display area
|Measured temperature data is displayed
|Joint of temperature sensor (our product) for high temperature
|④ Power inlet
The visual distance can be secured by using the red color high brightness 7-segment LED (Character height 76mm).
When the measurement temperature exceeds 500℃, the maximum temperature during the measurement is displayed by the peak temperature maintenance function.
|Big LED 7-segment display(Character height 76mm / Red color high brightness LED)
|Type R thermocouple, which complied with JIS
|Range of measurement temperature
|0 ~ 1760 ℃
|Unit of display
|[ ℃ ]
|Operating temperature limit
|0℃ 〜 40℃
|Operating humidity limits
|Not greater 70%(RH)
|AC85V ~ 265V
|External dimensions (mm)
|Large temperature display (YDW-500)